New Holland L223 / NOT AVAILABLE
Skid Steer Loaders L223
Features
L213, L215 and C227 with their radial-lift boom geometry are ideal for digging and pushing. Productivity is boosted by their
outstanding breakout force and the geometry of the arm, which ties it directly into the chassis ensuring more pushing power.
Radial models are also suitable for applications where maximum reach is needed at medium height; for example at 719 mm height
the reach is 1.109 mm!
Specifications
| Model | L223 |
| Dimensions | |
| Overall operating height | |
| with foundry/excavating bucket short lip, in (mm) | 159.7 (4056) |
| with low profile/standard lip bucket, in (mm) | 163.7 (4159) |
| with low profile extended/long lip bucket, in (mm) | 168.8 (4287) |
| Height to | |
| Bucket hinge pin, in (mm) | 129.4 (3287) |
| Top of ROPS, in (mm) | 78.8 (2002) |
| Bottom of level bucket, fully raised, in (mm) | 122.6 (3115) |
| Overall length | |
| without attachment with coupler, in (mm) | 117.8 (2993) |
| with foundry excavation bucket on ground, in (mm) | 142.9 (3631) |
| with low profile bucket, in (mm) | 147 (3734) |
| with low profile extended bucket, in (mm) | 152.1 (3863) |
| Dump | |
| Dump angle, degrees | 55 |
| Dump height | |
| with foundry/excavating bucket short lip, in (mm). | 102.9 (2615) |
| with low profile/standard lip bucket, in (mm). | 100 (2541) |
| Dump reach (max height), in (mm) | 32.3 (821) |
| Maximum attachment rollback | |
| Bucket on ground, degrees | 34 |
| Bucket at full height, degrees | 85 |
| Wheelbase and Clearance | |
| Wheelbase, in (mm) | 52 (1322) |
| Ground clearance (bottom of belly pan), in (mm) | 8 (203) |
| Angle of departure, degrees | 24 |
| Clearance circle | |
| without bucket, in (mm) | 56.2 (1428) |
| with 60” inch foundry bucket in carry position, in (mm) | NA |
| with 60” inch low profile bucket on ground, in (mm) | NA |
| with 60” inch extended low profile on ground, in (mm) | NA |
| with foundry bucket in carry position, in (mm) | 80.3 (2039) with 72” bucket |
| with low profile bucket on ground, in (mm) | 87 (2210) with 72” bucket |
| with extended low profile on ground, in (mm) | 91.5 (2323) with 72” bucket |
| Clearance circle rear, in (mm) | 70.4 (1789) |
| Rear axle to bumper, in (mm) | 40.7 (1034) |
| Tread width, in (mm) | 56.9 (1448) with 12” x 16.5” tires |
| Overall width, in (mm) | 69.6 (1768) |
| Engine | |
| Manufacturer/model | FPT / F5H FL463 |
| Type | Diesel 4-stroke, Turbo, D.I. |
| Cylinder | 4 |
| Bore/stroke, in (mm) | 3.9 x 4.1 (99 x 110) |
| Displacement, in³ (L) | 195 (3.2) |
| Fuel injection | HPCR Direct |
| Fuel | #2 diesel |
| Fuel filter | Pre-filter spin on @ 30 microns - Main-filter spin on @ 4 microns |
| Air intake | Turbocharged with external CEGR |
| Cooling | Liquid |
| Engine speeds | |
| High idle - no load, rpm | 2500 +/- 25 |
| Rated - full load, rpm | 2500 |
| Low idle, rpm | 1150 +/- 25 |
| Horsepower per SAE J1349 | |
| Gross hp (kW) | 74 (55) @ 2500 rpm |
| Net hp (kW) | 68 (51) @ 2500 rpm |
| Peak torque, lb-ft (N•m) | 232 (314) @1400 rpm |
| Power Train | |
| Drive pump mechanical | |
| Pump to engine ratio | 1:01 |
| Displacement, in³ (cc) | 46 (2.81) |
| Flow, gpm (Lpm) | NA |
| Flow at rated engine rpm @100% eff., gpm (Lpm) | 29.4 (111) |
| Charge pressure, psi (bar) | 360 (24.5 ) |
| System relief, psi (bar) | 5220 (360) |
| Control | Mechanical servo |
| Drive pump electro hydraulic | |
| Pump to engine ratio. | 1:01 |
| Displacement, in³ (cc). | 2.75 (45) |
| Flow, gpm (Lpm). | 28.8 (109) |
| Charge pressure, psi (bar). | 362 (25) |
| System relief, psi (bar). | 5220 (360) |
| Control. | Electro hydraulic |
| Drive motors | |
| Max displacement, in³ (cc) | 28.7 (470) |
| Speed @ high idle engine rpm | 237 |
| Speed @ optional high speed, rpm | 355 |
| Torque @ max displ. and relief pressure, ft-lbs (N•m) | 1987 (2694) |
| Travel speed with spec tires | |
| Low range, mph (km/h) | 7.0 (11.3) |
| High range (optional), mph (km/h) | 10.5 (16.9) |
| Final drive | Single-reduction chain drive |
| Drive chain | |
| Size | ASA #100 |
| Axles | |
| Diameter, in (mm) | 2.44 (62) |
| Length, in (mm) | 15.6 (396) |
| Parking brake | |
| Type. | Spring applied, hydraulic release disc |
| Engagement | Depress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine |
| Hydraulic System | |
| Pumps | |
| Type.. | Gear |
| Displacement standard aux., in³ (cc) | 2.23 (36.6) |
| Displacement high flow aux., in³ (cc) | 1.24 (20.4) |
| Pump flow, gpm (Lpm) | 24.2 (91.5) |
| Optional high flow, gpm (Lpm) | 37.6 (142.5) |
| Loader control valve | |
| Type… | 3 spool / open center / series |
| Relief pressure, psi (bar) | 3046 (210) |
| Hydraulic filter | 4 microns / spin on |
| Cylinders | |
| Lift cylinder | |
| Bore diameter, in (mm) | 2.5 (63.5) |
| Rod diameter, in (mm) | 1.75 (44.45) |
| Stroke, in (mm) | 33.5 (851.9) |
| Closed length, in (mm) | 46.9 (1192) |
| Bucket cylinders | |
| Bore diameter, in (mm). | 3.0 (76.2) |
| Rod diameter, in (mm). | 1.5 (38.1) |
| Stroke, in (mm). | 16.1 (410) |
| Closed length, in (mm). | 24 (610) |
| Weights | |
| Operating weight, lbs (kg) | 7400 (3350) |
| Shipping weight, lbs (kg) | 7065 (3200) |
| Service Capacities | |
| Fuel tank, gal (L) | 25.5 (96.5) |
| Engine oil with filter, qt (L) | 10 (9.4) |
| Hydraulic system | |
| System capacity with filter, qt (L) | 47 (44.5) |
| Chain tanks (per side), qt (L) | 29.5 (27.9) |
| Rated operating load | |
| 50% tip, lbs (kg) | 2250 (1020) |
| Tipping load, lbs (kg) | 4500 (2045) |
| Breakout forces | |
| Lift cylinder, lbs (kN) | 5080 (22.6) |
| Bucket cylinder, lbs (kN) | 8620 (38.3) |
| Cycle times | |
| Raise, sec | 3.8 |
| Lower, sec | 2.4 |
| Dump, sec | 2.6 |
| Roll back, sec | 2 |
-
![sales icon]( "Sales Department")
Sales
Find What You Need
-
![parts icon]( "Parts Department")
Parts
Find The Parts You Need
-
![service icon]( "Service Department")
Service
Service Your Machine
